RB iconIP iconMPE iconRBAS iconRouse icon

Lupus Podbieracz pokosów 3.4 m or 4.3m

Precio sin IVA

FavoriteFavorito
shareCompartir
Save searchGuardar búsqueda
Imprimir

INFORMACIÓN

Categoría
Accesorios para cosechadoras combinadas
Marca / modelo
Lupus Podbieracz pokosów 3.4 m or 4.3m
Opciones extras
Nuevo/sin usar
País
Polonia
Mascus ID
4D4C9DBC

FIJACIÓN DE PRECIOS

Seleccione una moneda

DETALLES

País de fabricación
Polonia
Más información
Swath pick-up for picking up phacelia, grass, oilseed rape 3.4 m for John Deere harvesters The swath pick-up is designed for threshing seed grasses, leguminous crops, cereals from desiccated shafts. The swath pick-up has been adapted for harvesting swaths previously mown with the SWATCH, e.g. oilseed rape, mustard, broad beans, buckwheat or seed grass. The machine has been designed to cope with the harvesting of plants that are easy to shed, have a high degree of weed infestation and mature unevenly. The machine is available in two versions: with a width of 3.4 m or 4.3 m for Claas and New Holland combines. The swath pick-up uses an approximately one-metre-long rubber belt with spring-mounted pairs of fingers. These feed the crop into the auger which narrows its flow. There is also an apron between one component and the other. This prevents the tines from dragging the crop back into the stubble. The pick-up requires only one pair of hydraulic couplings to power the orbital motor driving the belt. Picking up swaths with a standard harvester with a cutterbar results in the grain spilling onto the soil. In addition, the equipment is constantly in contact with uneven ground, leaving it vulnerable to damage. The pick-up, on the other hand, is positioned at the correct height in relation to the ground, with only the pick-up fingers made of flexible plastic coming into contact with the ground. This allows the machine to run at higher speeds of up to 14 km/h. Adjusting the speed of the swather pick-up belt This conveyor uses the hoses which, in the case of a traditional grain elevator, are responsible for setting the motovalves in motion. As a result, the belt speed can be adjusted as required or set to automatic mode, where its speed is synchronised with that of the combine harvester. The worm-finger feeder is driven by a Cardan shaft connected on the left side. The swath pick-up can be adapted to any brand of combine harvester. You can find videos of the swath pick-up with John Deere, Case, Claas, New Holland combines on our website.Mostrar más

FIRMA HANDLOWA LUPUS SYLWESTER WILK

Mleczarska 6 06-400 Ciechanów Mazowieckie Polonia
1
Años en Mascus
Recibir notificación por correo electrónico
report adReportar anuncio sospechoso