CAT D 10 R

# Caterpillar D10R Track-Type Tractor - Specifications ### Engine - Model: Cat 3412TA - Gross Power: 613 hp (457 kW) - Net Power (Cat): 570 hp (425 kW) - Net Power (SAE J1349): 564 hp (421 kW) - Net Power (EU 80/1269): 570 hp (425 kW) - Bore: 5.4 in (137 mm) - Stroke: 6 in (152 mm) - Displacement: 1649 in³ (27 L) ### Weights - Operating Weight (with 10SU blade & single-shank ripper): 145507 lb (66001 kg) - Operating Weight (with 10U blade & single-shank ripper): 146993 lb (66675 kg) - Shipping Weight: 104000 lb (47174 kg) ### Travel & Performance - Transmission: Planetary power shift, 3 forward / 3 reverse - Speed (Forward): 2.5 mph (4 km/h) / 4.4 mph (7.1 km/h) / 7.7 mph (12.5 km/h) - Speed (Reverse): 3.1 mph (5 km/h) / 5.5 mph (8.9 km/h) / 9.7 mph (15.6 km/h) - Drawbar Pull (1st Forward): 205030 lbf (910 kN) - Drawbar Pull (2nd Forward): 114640 lbf (510 kN) - Drawbar Pull (3rd Forward): 61730 lbf (270 kN) ### Hydraulic System - Bulldozer Relief Valve: 2700 psi (18616 kPa) - Tilt Cylinder Relief Valve: 2800 psi (18300 kPa) - Ripper (Lift/Pitch) Relief Valve: 2700 psi (18616 kPa) - Main Pump Flow: 108 gpm (408.9 L/min) - Tilt Cylinder Flow: 32 gpm (121 L/min) ### Undercarriage - Track Gauge: 100.4 in (2550 mm) - Standard Shoe Width: 24 in (610 mm) - Track Rollers per Side: 8 - Ground Clearance: 24.2 in (615 mm) - Ground Pressure: 19.7 psi (135.8 kPa) - Length of Track on Ground: 152.8 in (3880 mm) - Ground Contact Area: 7326 in² (4.7 m²) ### Dimensions (Basic Tractor) - Length (w/ drawbar): 17.5 ft (5331 mm) - Width (over trunnions): 12 ft 2 in (3716 mm) - Width (w/o trunnions, std shoe): 10 ft 4 in (3160 mm) - Height (to top of FOPS cab): 13 ft 5 in (4102 mm) - Height (to top of stack): 14 ft 11 in (4538 mm) ### Blades #### 10SU Blade - Capacity (SAE J1265): 24.2 yd³ (18.5 m³) - Width (over end bits): 15.95 ft (4862 mm) - Height: 6.95 ft (2119 mm) - Digging Depth: 26.54 in (674 mm) - Weight (w/o hydraulic controls): 22688 lb (10291 kg) #### 10U Blade - Capacity (SAE J1265): 28.8 yd³ (22 m³) - Width (over end bits): 17.27 ft (5263 mm) - Height: 6.95 ft (2119 mm) - Digging Depth: 26.54 in (674 mm) - Weight (w/o hydraulic controls): 23856 lb (10821 kg) ### Rippers (Single Shank) - Maximum Penetration (Standard Tip): 58.82 in (1494 mm) - Maximum Clearance (Raised): 36.5 in (927 mm) - Weight (w/o hydraulic controls): 15734 lb (7137 kg) - Added Length: 5.77 ft (1760 mm) ### Fluid Capacities - Fuel Tank: 293 gal (US) (1109 L) - Cooling System: 34.9 gal (US) (132 L) - Engine Crankcase: 18 gal (US) (60 L) - Power Train: 50 gal (US) (189 L) - Implement Hydraulic Tank: 28.5 gal (US) (108 L)