Historial de servicio completo
Sí
Ultima revisión
2024-11-12
Nº de propietarios anteriores
1
Capacidad máxima de elevación
3,000 kg
Altura de elevación
900 cm
Tipo de cabina
Cabina cerrada
Tipo de carrocería
Articulado
Potencia del motor
90.5 kW (123 cv)
Fabricante del motor
ISUZU
Cilindrada del motor
414 cm3
Salida de elementos hidráulicos auxiliares
54 l/min
Dimensiones de transporte (LaxAnxAl)
377512382.177 m
Alcance con carga máxima
700 cm
Llantas delanteras/restante del tren
98
Restante de llantas traseras
2
País de fabricación
Francia
Términos de entrega
FCA, CFR, CIF, EXW
Más información
530-70 MAX. PAYLOAD: 3000kg (6614lb) 540-70 MAX. PAYLOAD: 4000kg (8818lb)
MAX. LIFT HEIGHT: 7.0m (23ft)
MAX. HORSEPOWER: 90.5kW (121hp) MAX. SPEED 40kph (25mph)
MAX. LIFT HEIGHT: 7.0m (23ft)
MAX. HORSEPOWER: 90.5kW (121hp) MAX. SPEED 40kph (25mph)
Machine model 530-70
m (ft-in)
Overall height 2.49 (8-2)
Overall width (over tyres)* *Dependant upon tyre specified. 2.29 (7-6)
Inside width of cab 0.94 (3-1)
Front track 181 (5-11)
Wheelbase 2.75 (9-0)
Overall length to front tyres 4.38 (14-4)
Overall length to front carriage 4.99 (16-4)
Ground clearance 0.40 (1-4)
Outside turn radius(over tyres) 3.7 (12-2)
Weight kg (lb) 7100 (15656)
Tyres 445/70 R24
Machine Model Complies with stability test EN 1459 Annex B. 530-70
Maximum lift capacity kg (lb) 3000 (6614)
Lift capacity to full height kg (lb) 2400 (5291)
Lift capacity at full reach kg (lb) 1250 (2756)
Lift height m (ft-in) 7.0 (23-0)
Reach at maximum lift height m (ft-in) 0.48 (1-7)
Maximum forward reach m (ft-in) 3.7 (12-2)
Reach with 1 tonne load m (ft-in) 3.7 (12-2)
Placing height m (ft-in) 6.3 (20-8)
Latest technology and advanced design provides low fuel consumption, reduced noise, high torque and power output, total reliability and minimal maintenance.Two-stage, dry type air filter with primary and safety elements.
Machine Model 530-70/540-70
Displacement ltr (in3) 4.4 (269)
No. of cylinders 4
Bore size mm (in) 105 (4.3)
Stroke mm (in) 127 (5)
Aspiration Turbo Intercooled
Power rating
Power @ 2200rpm kW (HP) 90.5 (121)
Torque rating
Torque @ 1400rpm Nm (lbf ft) 434 (320)
Machine model 540-70
m (ft-in)
Overall height 2.49 (8-2)
Overall width (over tyres) 2.29 (7-6)
Inside width of cab 0.94 (3-1)
Front track 181 (5-11)
Wheelbase 2.75 (9-0)
Overall length to front tyres 4.38 (14-4)
Overall length to front carriage 4.99 (16-4)
Ground clearance 0.40 (1-4)
Outside turn radius(over tyres) 3.7 (12-2)
Weight kg (lb) 7800 (17199)
Tyres 445/70 R24
Machine Model Complies with stability test EN 1459 Annex B. 540-70
Maximum lift capacity kg (lb) 4000 (8818)
Lift capacity to full height kg (lb) 2500 (5511)
Lift capacity at full reach kg (lb) 1500 (3307)
Lift height m (ft-in) 7.0 (23-0)
Reach at maximum lift height m (ft-in) 0.48 (1-7)
Maximum forward reach m (ft-in) 3.7 (12-2)
Reach with 1 tonne load m (ft-in) 3.7 (12-2)
Placing height m (ft-in) 6.3 (20-8)
Load sensing valve, three stage gear pump with suction strainer and filter.
530-70 540-70
Operating system pressure bar (psi) 241 (3500) 260 (3770)
Main Hydraulics ltrs/min 110 110
Hydraulic Cycle Times Seconds Seconds
Boom raise 5.8 6.7
Boom lower 4.5 5.3
Extend 6.1 6.1
Retract 5.5 5.5
Bucket dump 3.2 3.2
Bucket crowd 2.5 2.5
JCB 5 speed powershift transmission incorporating torque converter, bevel box and a 5 speed powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control and 5 forward and 4 reverse powershift gears with auto-selection between 4th and 5th. With direct drive in 5th gear.
Travel speed 40kph (25mph).
Front and rear drive axles:JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-immersed in-board multi-disc type on front axle.
Parking brake:Hand operated disc brake on output of gearbox.
Boom is manufactured from high tensile steel. Low maintenance, hard wearing pads.
JCB Q-fitself-levelling carriage with lever operated pin locking accepts palletMostrar más