AAMCOR CAS Stemfast Stemming Truck with 6x6 Osh Ko en venta - Estados Unidos

Precio sin IVA
4,276,181 MXN
249,001 USD
Precio sin IVA
4,276,181 MXN
249,001 USD
[Other] AAMCOR CAS Stemfast Stemming Truck with 6x6 Osh Ko

INFORMACIÓN BÁSICA

CategoríaCamiones de perforación móvil
Marca / modeloAAMCOR CAS Stemfast Stemming Truck with 6x6 Osh Ko
Año2020
Opciones extrasUsada
LugarSLC, Utah
País
Mascus ID03D412E0
+ Mostrar más detalles

FIJACIÓN DE PRECIOS

Seleccione una moneda
Precio sin IVA4,276,181 MXN  (249,001 USD)
IVANo incluye IVA reclamable
Precio con IVA-

DETALLES

Número de unidadHB17321
Configuración del ejeNo
Más informaciónAAMCOR New Design, 2 belt design, Stem Fast, Left Hand Discharge, Stemming truck with options; Options include; *Osh Kosh Chassis (2000 model) as shown in photos 9 Speed Fuller RTO11707LL All Wheel Drive (6x6) 116,000 miles 23,000 Lb. front suspension and axles 46,000 Lb. rear suspension and axles Stemfast Stemming truck body installed on above Osh Kosh Chassis; *100% steel welded 20 Cubic yard Hopper with exterior powder coating and lined interior *24 inch Wide Positive Drive Conveyor in bottom of Stemming bed hopper *Custom length Placing Conveyor to reach either side of truck for stemming *Plus1 In-Cab Control System identical to AAMCOR bulk trucks, allows operator to operate unit in the cab of the chassis, controls belts and positioning, on/off and amount of stemming to be discharged *Joystick control of the placing conveyor mounted in the control panel *High performance Stemming sling system to control distance of stemming from the end of the conveyor belt *Hydraulic Vibrators installed on the bed *The hydraulic system includes a full pressure compensated hydraulic pump and valves *High Performance Hawe Proportional Valves for precise control of the Stem Fast body functions *Water spray system for dust control while delivering Stemming to the hole *A metering system that can determine how much stemming to put in the hole on a meter basis *Plus1 Control system same as installed on all AAMCOR Bulk Explosive trucks *A camera system is installed at the rear of the hopper and another at the end of the placing conveyor belt *a Hydraulic tilting grizzly has been installed to remove oversized material is installed on the top of the hopper * A Over Cab protector is installed on the front of the hopper, to assist in protecting the chassis cabin Price will be $249,999 Or best offer FOB SLC UT After years of research and engineering, as well as experience in moving dirt, bark, gravel, cement, AN and other materials, we have put together a new form of Stemming truck (Stem Fast) which will revolutionize the way stemming has been done in the past, this new way of stemming will match a similar operator experience, to a bulk truck loading the bore hole with Bulk Explosives Products. This will keep operators training to a minimum and make your life as a blaster much easier. AAMCOR/CAS has approximately 15 of these units in various parts of the world that are dedicated for Stemming blast holes, and CAS has literally hundreds in the USA and various parts of the world which are being used in the reclamation, excavation fill, and other uses related to conveying materials from the hopper to the ground, so the experience in conveying with belts is the best in the world.
AAMCOR LLC
  • +1 8...MOSTRAR
    Por favor, dígale al vendedor que encontró su máquina en venta en Mascus"
Enviar un correo electrónico

Nombre/apellido del vendedor

  • HARLEY BRADBURY

    AAMCOR LLC
    • +1 8...MOSTRAR
      Por favor, dígale al vendedor que encontró su máquina en venta en Mascus"
    • P.O. Box 271607, SLC UT 84127, Estados Unidos

Compañía

AAMCOR LLC

1
AÑOS ACTIVO EN MASCUS
Mapa e información
Todos los anuncios
Reportar anuncio sospechoso
Marcas relacionadas
MarcaNúmero de anuncios
Caterpillar34207
Volvo8961
Liebherr8785
Komatsu7088
JCB4321

Detalles - Número de unidad: HB17321, Configuración del eje: No