Pomot Pomot T544/3 - 8000L with suction arm
Precio sin IVA
5
Favorito
Compartir
Guardar búsquedaImprimir
INFORMACIÓN
Categoría
Tanques para abono líquido
Marca / modelo
Pomot Pomot T544/3 - 8000L with suction arm
Año
2024
Opciones extras
Nuevo/sin usar
País
Polonia
Mascus ID
39FBF3AB
FIJACIÓN DE PRECIOS
Seleccione una moneda
DETALLES
Configuración de transmisión
Con remolque
País de fabricación
Polonia
Más información
Type T 544/3 slurry tanker 8000 liters with water pump
1. Tank with a capacity of 8,000 liters
a. The tank and tank bottoms are made of 5 mm thick sheet metal
b. Hot-dip galvanized tank
c. 8000L tank divided into two parts:
I. 2500L for clean water
II. 5500L for waste
d. Hydraulically opened and manually locked bottom.
e. Kipped tank
- intermediate frame enabling the tank to be lifted at an angle of 45o
- tank mounted on a frame using an intermediate frame and ball hinges
- hydraulic cylinder lifting the tank on the intermediate frame
f. Upper hatch with a diameter of 500 mm with a ladder in the clean water tank.
2. Frame structure :
a. Frame made of a closed section.
b. Galvanized frame + painted in any color from the RAL palette
c. Single-axle
d. Tire size 560/60 R22.5
e. Pneumatic braking system - two-circuit with 4-stage braking force regulation.
f. Parking handbrake.
g. Fenders and open boxes above the mudguards for transporting suction hoses.
h. Hydraulic support foot.
i. Coupling to the tractor using the lower hitch hitch. Eyelet diameter 50 mm.
3. GARDA EVO JET set by Battioni & Pagani Pumpe transmitting power from the PTO to the compressor or water pump. – the best solution – we talked with our technical department and this pump will be the best.
KPS 490 compressor with a capacity of approx. 13,500 l/min for continuous operation
a. Drive 1000 rpm.
b. Overflow protection with a two-ball valve at the top of the tank and a siphon with sight glass and drain valve
c. Pressure gauge
d. Two safety valves, overpressure 0.05 Mpa and negative pressure -0.07 Mpa.
e. Oil separator – a silencer that quietens the compressor operation by -15dB.
The water pump
f. Maximum pump operating pressure 130 bar.
g. Maximum capacity 122 / min
h. Water pump driven by the GARDA gear
i. Water transfer
j. Valve for draining water from the tank
k. Valve for connecting the water system to be blown out of residual water with compressed air for the winter
l. Acoustic signal informing about full and empty clean water tank. Automatic pump shutdown when the tank is full or empty.
4. MEC 6500 compressor with hydraulic drive (additional )
a. Compressor connected to the waste tank - possibility of refueling through the side or rear gate in the event of a failure of the main compressor
5. Suction arm mounted at the top of the tank
a. Manual rotation with center plate.
b. Air brake.
c. Rotation angle: 300°.
d. Lowering: by hydraulic cylinders.
e. Pneumatic gate valve.
f. Suction hose with a length of 6 meters and a diameter of 4”
g. Pressure hose connected to the pressure pump and routed along the suction hose - supplying pressurized water to mix and break up the medium during suction.
6. Hydraulic reel with high-pressure hose
a. Length of high-pressure hose 50 m
b. Hose diameter ¾”
c. Hydraulic reel drive
d. Sewage cleaning nozzle
7. Manual reel with high-pressure hose
a. Length of high-pressure hose 20 m
b. Hose diameter ½ ''
c. Manual reel
d. High pressure gun
8. The main drain valve in the rear hatch cover, 4” diameter, hydraulic.
9. Additional connections
a. In the clean water tank
– connector with a 2” ball valve and W52 connector
- connector with a 4" manual gate valve and a ball joint
b. In the waste tank
– connector with a 4” manual valve for water drainage from above the sediment
10. Filling indicators:
a. in the clean water tank.
b. in the waste tank.
11. 12V electrical installation.
12. High beam lamps with a metal cover.
13. Warning light at the top of the tank ("beacon") 2 pcs. at the front and rear of the tank.
14. Work lighting – LED lamps 2 pcs. at the back of the tank
15. Steering box located at the back of the vehicle.
16. 4” suction hose, 3 m long, with suction strainer
17. Suction hose extension 4” 3 m + extension 4” 3 m PVC
18. Suction hose holders.
19. Power take-off shaft - wide-angle
20. Tool bMostrar más
Top-Agro Sp. z o.o.
Jeleniogórska 71, Łagów 59-900 Zgorzelec Dolnośląskie Polonia
11
Años en MascusRecibir notificación por correo electrónico
Reportar anuncio sospechoso